- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Compact and rugged, this dual-sensor pressure calibrator is designed to bring laboratory accuracy to outdoor field conditions and features a psi range of up to 3000. In addition, this calibrator is fully temperature-compensated through testing of all measured parameters while exposed to 32 to 122°F (0 to 50°C) temperatures.
Compact and rugged, this dual-sensor pressure calibrator is designed to bring laboratory accuracy to outdoor field conditions and features a psi range of up to 3000. In addition, this calibrator is fully temperature-compensated through testing of all measured parameters while exposed to 32 to 122°F (0 to 50°C) temperatures.
Compact and rugged, this pressure calibrator is designed to bring laboratory accuracy to outdoor field conditions. In addition, it is fully temperature compensated through extensive testing of all measured parameters while being exposed to environments of 2 to 122°F (0 to 50°C).
Intended for gauge pressure measurement to indicate the difference between applied pressure and ambient barometric pressure. The zero button also can be used as a tare function - extending the functionality of the calibrator for special applications.
Features
Lightweight
This calibrator weighs less than a pound and advanced technology is employed throughout the product line. Sensors are constructed with stainless steel isolation diaphragms and permanent oil fill. This means that this calibrator can be used with gases and liquids.
Battery life
Long battery life is achieved with a low power, RISC (reduced instruction set) type micro-controller for computation of complex algorithms. A 24 bit analog to digital converter provides internal resolution of 1 part in 16.7 million. Internal resolution always exceeds the displayed resolutions for all measurements. Full accuracy is maintained even while the low battery icon is flashing.
Communication
This calibrator does not require any manual adjustments or trimming. All calibration is accomplished via an optically isolated communications port using a USB physical interface. The optical isolation protects the Model 30 from electrical transients that may appear on the USB connector or cabling to a PC.
Applications
| Accuracy - Pressure Measurement | |
| 0 to 110% of Range | ±(0.05% of reading + Floor Term) |
| Floor Term | 0.005% of F.S. or display resolution, whichever is greater |
| Vacuum | ±(0.25% of reading + Vacuum Floor Term) Vacuum Floor Term (VFT): 0.004 psi |
| Accuracy - Milliamperes | |
| Accuracy | ±(0.025% of reading + 0.001 mA) |
| Range | 0 to 55 mA |
| Resolution | 0.001 mA |
| Connection | Pressure fitting: ⅛" (3.18 cm) female NPT Milliamperes: 4 mm jacks, 0.75" (19 mm) spacing Communication: micro USB |
| General Specifications | |
| Display | Screen: 2 lines of up to 6 digits, 0.2" (5 mm) high Display rate: 2 readings/second (adjustable to 1, 3, or 3.7 readings/second) |
| Temperature | Operating: 2 to 122°F (0 to 50°C) Storage: -4 to 158°F (-20 to 70°C) |
| Electricity | Range: 0 to 55 mA Resolution: 0.001 mA Accuracy: ±(0.025% of reading + 0.001 mA) Maximum voltage: 0.3 V DC Maximum current: 100 mA |
| Power Supply | 1 x 9 V, 90 hours typical |
| Enclosure | Housing: Extruded aluminum Keypad and labels: UV resistant polyester |
| Dimensions | 5.4 x 2.75 x 1.15" (137.2 x 69.8 x 29.2 mm) |
| Weight | 14 oz (400 g) |
| Accuracy - Pressure Measurement | |
| 0 to 110% of Range | ±(0.05% of reading + Floor Term) |
| Floor Term | 0.005% of F.S. or display resolution, whichever is greater |
| Vacuum | ±(0.25% of reading + Vacuum Floor Term) Vacuum Floor Term (VFT): 0.004 psi |
| Accuracy - Milliamperes | |
| Accuracy | ±(0.025% of reading + 0.001 mA) |
| Range | 0 to 55 mA |
| Resolution | 0.001 mA |
| Connection | Pressure fitting: ⅛" (3.18 cm) female NPT Milliamperes: 4 mm jacks, 0.75" (19 mm) spacing Communication: micro USB |
| General Specifications | |
| Display | Screen: 2 lines of up to 6 digits, 0.2" (5 mm) high Display rate: 2 readings/second (adjustable to 1, 3, or 3.7 readings/second) |
| Temperature | Operating: 2 to 122°F (0 to 50°C) Storage: -4 to 158°F (-20 to 70°C) |
| Electricity | Range: 0 to 55 mA Resolution: 0.001 mA Accuracy: ±(0.025% of reading + 0.001 mA) Maximum voltage: 0.3 V DC Maximum current: 100 mA |
| Power Supply | 1 x 9 V, 90 hours typical |
| Enclosure | Housing: Extruded aluminum Keypad and labels: UV resistant polyester |
| Dimensions | 5.4 x 2.75 x 1.15" (137.2 x 69.8 x 29.2 mm) |
| Weight | 14 oz (400 g) |
